Ghost Car Immobiliser
Ghost is an anti-theft device of modern generation that blocks your vehicle from starting if you do not connect the sequence pin. It is invisible and uses the CAN data networks.
It can be set to a unique pin code that can be input via buttons that are already on the steering wheel, centre console or door panels. This makes it extremely efficient against modern methods of theft such as key replication and relay vehicle hacking.
Easy to install
The Ghost immobiliser is a cutting-edge security gadget protects your vehicle from key cloning and hacking. It can even protect your keys from theft. Full File is discreet, unnoticeable to thieves, and TASSA certified (a third-party group of experts in security and law enforcement). This makes it one of the most reliable devices on the market.
The ghost system works by linking to your vehicle's CAN bus - a network of electronic control units (ECUs) that controls the transmission, engine, and brakes. The system then stops the vehicle from starting until a unique PIN code sequence is entered. The PIN code is programmed by pressing buttons on the steering wheel, center console, or door panels. The sequence can be as long as 20 presses, making it nearly impossible for thieves to determine a valid code.
Unfortunately, a few determined thieves are finding ways to get around these sophisticated security systems. One way to do this is by blocking or spoofing the signals between the ECU and Ghost Immobiliser. Another method is by locating and connecting to the CAN bus and then sending malicious commands to the vehicle's ECU. This can cause the ECU to shut down the vehicle or make it inoperable. Installing additional security measures, such as an alarm and GPS tracker can help keep your vehicle secure.
Ghost immobilisers can be a great addition to your existing security measures. It is easy and quickly installed without the requirement for additional hardware or visible components which could alert thieves to its presence. The device can be concealed under your dashboard or behind the steering wheels making it difficult for thieves to steal it. It's quiet and cannot be detected using radio frequencies.
You should only install your ghost immobiliser with an approved installer such as Thatcham or Autowatch. They are experts who know your vehicle inside and out. They'll be able to locate the ideal hiding spot for the device, and make sure that it's hidden away from view. It is recommended to also use a Thatcham-approved tracker and dash camera that has your ghost immobiliser for the most secure protection.
There are no key-fobs, LEDs or other indicators to indicate the location of the vehicle.
With the growing sophistication of vehicle thieves, it is becoming more difficult to keep your most prized possessions safe. Thankfully, the manufacturers of Ghost Immobiliser have stayed one step ahead, developing technology that is completely unnoticeable to thieves. This anti-theft device, which is at the forefront of technology, safeguards your car from key cloning or hacking. It could even stop theft. It communicates with the ECU through the CAN data circuit, and is totally undetectable to any RF scanning or code grabbing technology.
The device is totally unnoticed by car thieves as it does not have any lights or radio signals. Instead, it uses buttons on your car, like the dashboard or steering wheel to generate a unique PIN code sequence that needs to be entered in order for the car to start. You can alter this at any time to ensure you are in total control of the security of your vehicle. It will also prevent a thief from adding new keys, or replacing the ECU. This will stop them from driving off with your vehicle.
The device is also able to detect signal relay attacks to stop theft. The device can detect signal relay attacks, in which thieves amplify the signal from your existing key fob in order to get around an immobiliser. However the Ghost system is able to detect this and disable the key fob, stopping thieves from starting your car.
You can also utilize the Ghost app on your phone to access a service mode that allows you to start your vehicle without using your pin. This is an excellent option if you want to drive your car to a garage for maintenance or valet parking. The app will also notify you when the car has been moved away from its initial position.
As you can see, investing in a ghost immobiliser has many advantages. It is easy to install, discreet, and will safeguard your property from a range of threats. It's also TASSA verified which means that it has passed the stringent tests conducted by an independent organization. Select a reputable, TASSA-certified supplier if you are considering installing a Ghost immobiliser. This guarantees that the person installing the device is qualified and trained and will work in conjunction with the car's interface to offer the highest level of protection.
Your car will not be permanently damaged permanently
The Ghost immobiliser is hidden behind the dashboard and below the steering wheel, so thieves are unable to spot it or even detect it. This is a huge advantage over immobilisers that can be seen and easily beaten by signal cloning or jamming devices. This is especially useful for owners of luxury cars who want to preserve their car's appearance and performance, while also providing a higher level of security.
In addition to that, the Ghost CAN Bus immobiliser uses buttons on the vehicle's steering wheel and centre console, as well as the door panels to make an individual pin code that needs to be entered before driving your vehicle. This pin code works just like a credit card and you can configure it to be up to 20 characters in length. This makes it harder for thieves to hack or replicate the system. It also makes sure that only you are able to access the system.
When installing a ghost immobiliser, it is important to use a professional installation service. This will ensure that the device has been installed correctly and won't cause damage to your vehicle. A professional can help you solve any issues with your car and give advice on how to fix them.
It is recommended to disconnect the battery before starting the installation process. This will prevent any airbag malfunctions or electrical issues. deployment. It is also crucial to label the CAN H and CAN L wires, since mistaking these can lead to an incorrect installation or system failures. After identifying the power source and grounding point, insulate these connections using insulation tape or heat-shrink tubing to prevent short circuits. It is also an excellent idea to test the immobiliser upon installation to make sure it is functioning as intended.
The Ghost Immobiliser is a powerful tool to fight vehicle theft, but it's not foolproof. Thieves are constantly developing new tactics to bypass security systems, so it is crucial to incorporate it with other sophisticated security measures and be vigilant. Following these tips will help you decrease the chance of your vehicle is stolen and provide you peace of mind, regardless of where you park your vehicle.
TASSA verified
In recent years car owners have taken additional security measures to safeguard their vehicles. One such security measure is installing a ghost immobiliser that is designed to prevent vehicles from being stolen using key-cloning or hacking. However, determined thieves will always find ways to bypass these security devices.
To counter this a new generation of immobilisers was developed by the likes of Autowatch. These new devices are TASSA-verified, meaning they have been checked by experts from outside to ensure that the device is reliable. This confirms that the device can keep out even the most experienced thieves.
The device is discrete and unnoticeable by thieves, and works by connecting directly to your vehicle's buttons. This lets you set an unique PIN code sequence which has to be entered by pressing the buttons on your steering wheel or the centre console in order to start or drive the vehicle. The system is completely silent and only functions only if the PIN code is entered correctly. As the device does not emit radio frequencies, it is not detected by conventional detection techniques like radar guns or scanners.
Additionally, the Ghost II is a Thatcham approved device which means that it is recognized by insurance companies as a further layer of security and may lower your insurance premium based on the terms of the insurance company. This makes it one of the most advanced and reliable immobilisers available on the market.
It also means that the company you choose to install the device is competent. You can then rest assured you are getting a quality installation and the best service. This is particularly important you'll want the ghost to be recognised by your insurance company, since it could be beneficial in the event of your car is ever stolen.